Welcome to RCH Manufacturing.

RCH Manufacturing was founded in 2009 by Ronnie Hildum, retired supervisor of the Florida based Voyage Repair Team, which is the government Navy tiger team formed to provide immediate response to aircraft launch and recovery equipment issues. Upon Ronnie’s retirement from federal service, RCH Manufacturing was formed to meet a need found in the shore based arresting gear equipment world. Many parts and components are not supported in the Navy stock system and Ronnie’s VRT team use to overhaul and manufacture many of those parts during his years leading the VRT. A realignment of the VRT has altered its mission and left a void in the E-28 world now being filled by
RCH Manufacturing.

We invite you to browse through our store and shop with confidence. You can email sales@rchmanufacturing.com for quotes and for discount pricing on bulk purchases.

Thank you for visiting rchmanufacturing.com                Click on "VIEW ALL" to see all our products



extended validation certificate

1 - 130 of 130 items
(4) TAPERED SPACERS LOCATED UNDER THE FOUNDATION FRAME CABLE ASSEMBLY FOR FLUID STORAGE TANK E-28 STARTER SWITCH RELAY FOR 65 HP ELECTRONIC IGNITION ENGINE
(4) TAPERED SPACERS LOCATED UNDER THE FOUNDATION FRAMECABLE ASSEMBLY FOR FLUID STORAGE TANKE-28 STARTER SWITCH RELAY FOR 65 HP ELECTRONIC IGNITION ENGINE

A SET OF FOUR (4) TAPERED SPACERS LOCATED UNDER THE FOUNDATION FRAME THAT THE SPEED REDUCER BOLTS PASSES THROUGH.

CABLE ASSEMBLY WITHOUT TURNBUCKLE USED TO SECURE THE FLUID STORAGE TANK TO THE BASE. TURNBUCKLE SOLD SEPERATLY.

This item is the starter relay that is used between the ignition switch and the starter solenoid on the new 65 horsepower engine with electronic ignition.

$62.00

$0.00

$44.99

SPACER PLATE FOR E-28 FLUID PUMP WISCONSIN ENGINE HEAD GASKET SET OF 4 ALTERNATOR ELECTRICAL PLUG REPLACEMENT
SPACER PLATE FOR E-28 FLUID PUMPWISCONSIN ENGINE HEAD GASKET SET OF 4ALTERNATOR ELECTRICAL PLUG REPLACEMENT

THIS ITEM IS THE SPACER PLATE THAT IS INSTALLED BETWEEN THE E-28 FLUID PUMP AND THE ENGINE SLED OR FRAME.

THIS ITEM IS A SET OF FOUR HEAD GASKETS USED WITH THE WISCONSIN 65 HP ENGINE.

THIS ITEM CONSIST OF AN OEM REPLACEMENT PLUG AND WIRING PIGTAIL FOR THE PLUG THAT CONNECTS TO THE WISCONSIN ENGINE ALTERNATOR.

$250.00

$30.00

$19.00

BALDWIN OIL FILTER PART NUMBER BT248 CARBURETOR TO GOVERNOR LINKAGE CLIP P/N PK181 CLUTCH ASSEMBLY CROWFOOT CLIP USED TO LOCK CLUTCH ADJUSTMENT
BALDWIN OIL FILTER PART NUMBER BT248CARBURETOR TO GOVERNOR LINKAGE CLIP P/N PK181CLUTCH ASSEMBLY CROWFOOT CLIP USED TO LOCK CLUTCH ADJUSTMENT

THIS ITEM CONSIST OF 1 EACH BALDWIN OIL FILTER P/N BT248 USED AS A SUITABLE OIL FILTER ON THE E-28 WISCONSIN ENGINE.

THIS ITEM COSIST OF THE CLIP USED ON THE CARBURETOR TO GOVERNOR LINKAGE.  THIS ITEM IS ONLY THE CLIP.  IF YOU NEED THE ROD AND CLIP SEE THAT PRODUCT LISTED ON OUR SITE TOO.

THIS ITEM IS THE CLIP USED TO LOCK YOUR E-28 CLUTCH ADJUSTMENT.  SOME FOLKS CALL IT CALL IT THE CROWS FOOT CLIP AND THE BOOK CALLS IT A LOCK, ADJUSTING.  WHATEVER YOU WANT TO CALL IT, THE ITEM IS PICTURED THAT BEST DESCRIBES THIS ITEM.

$22.00

$6.00

$17.00

CONTROL CONSOLE OIL PRESSURE SWITCH CONTROL CONSOLE OIL PRESSURE TUBING TEE P/N 420013-1 E-28 FUEL HOSE BETWEEN TANK AND FUEL BOWL
CONTROL CONSOLE OIL PRESSURE SWITCHCONTROL CONSOLE OIL PRESSURE TUBING TEE P/N 420013-1E-28 FUEL HOSE BETWEEN TANK AND FUEL BOWL

THIS ITEM IS THE OIL PRESSURE SWITCH THE IS LOCATED INSIDE OR BEHIND THE CONTROL CONSOLE FACEPLATE.  THIS OIL PRESSURE SWITCH SERVES AS A CRITICAL PART OF THE ELECTRICAL SYSTEM FOR THE HOUR METER.

THIS ITEM IS THE TUBING TEE THAT IS LOCATED BEHIND THE CONTROL CONSOLE AND CONNECTS THE OIL PRESSURE SWITCH, THE OIL HOSE AND THE OIL PRESSURE GAGE.

THIS ITEM IS THE LONG FUEL HOSE ASSEMBLY THAT CONNECTS TO THE FUEL TANK AND THE OTHER END CONNECTS TO THE FUEL BOWL. EACH END OF THE HOSE HAS A SWIVEL NUT FITTING AND THE HOSE IS FULLY BRAIDED TO PROTECT THE HOSE FROM CRUSHING OR GETTING OTHER DAMAGE.

$33.00

$12.00

$184.50

E-28 OEM FLUID PUMP E-28 WISCONSIN DISTRIBUTOR ELECTRONIC IGNITION MODULE E-28 WISCONSIN ENGINE ELECTRONIC IGNITION GOVERNOR HOUSING
E-28 OEM FLUID PUMP E-28 WISCONSIN DISTRIBUTOR ELECTRONIC IGNITION MODULEE-28 WISCONSIN ENGINE ELECTRONIC IGNITION GOVERNOR HOUSING

THIS ITEM IS A OEM TUTHILL PUMP THAT IS USED ON THE E-28 ARRESTING GEAR TO MOVE FLUID FROM THE FLUID STORAGE TANK TO THE E-28 ENERGY ABSORBER.  THE PULLEY FOR THIS PUMP CAN BE PURCHASED SEPARATELY

THIS ITEM IS A NEW ELECTRONIC IGNITION MODULE FOR THE DISTRIBUTOR USED ON THE 65 HP WISCONSIN ENGINE.

THIS ITEM IS A NEW HOUSING FOR THE GOVERNOR OF AN ELECTRONIC IGNITION ENGINE WITH TOP MOUNT DISTRIBUTOR AND GOVERNOR. THIS IS THE HOUSING WITH GOVERNOR LEVER AND SHAFT ASSEMBLY. THIS ITEM DOES NOT INCLUDE THE REMAINING GOVERNOR PARTS OR DISTRIBUTOR.

$1,100.00

$99.00

$240.00

IGNITION COIL FOR WISCONSIN ENGINE WITH ELECTRONIC IGNITION LARGE ROLLER BEARING FOR RUNWAY/DEFLECTOR SHEAVE P/N MS19078-33 OIL LINE COUPLING P/N A89632-11
IGNITION COIL FOR WISCONSIN ENGINE WITH ELECTRONIC IGNITIONLARGE ROLLER BEARING FOR RUNWAY/DEFLECTOR SHEAVE P/N MS19078-33OIL LINE COUPLING P/N A89632-11

THIS ITEM CONSIST OF THE ELECTRONIC IGNITION COIL ASSEMBLY FOR THE 65 HP WISCONSIN ENGINE.

THIS ITEM IS THE LARGE HEAVY DUTY ROLLER BEARING USED ON THE RUNWAY EDGE AND DEFLECTOR SHEAVE ASSEMBLY.

THIS ITEM IS THE SMALL PIPE COUPLING THAT CONNECTS THE OIL PRESSURE SWITCH TO THE TUBING TEE AND IS NEEDED FOR PROPER OPERATION OF THE ENGINE OIL PRESSURE SWITCH.

$148.00

$319.00

$9.00

PRETENSION WARNING LIGHT - HOUSING ONLY - NO BULB PROTECTIVE RUBBER GROMMET FOR SPARK PLUG AND ELECTRICAL WIRING SPARK PLUG FOR MAGNETO IGNITION ENGINE
PRETENSION WARNING LIGHT - HOUSING ONLY - NO BULBPROTECTIVE RUBBER GROMMET FOR SPARK PLUG AND ELECTRICAL WIRINGSPARK PLUG FOR MAGNETO IGNITION ENGINE

THIS ITEM IS OUR CUSTOM MADE CAST ALUMINUM HOUSING FOR THE E-28 ARRESTING GEAR PRETENSION WARNING LIGHT.  THIS IS ONLY THE HOUSING WITH NO BULB.

THIS ITEM IS A PROTECTIVE RUBBER GROMMET USED ON THE E-28 ENGINE TO PROTECT THE ELECTRICAL WIRING AND SPARK PLUG WIRES FROM ENGINE VIBRATION.

THIS ITEM IS A SPARK PLUG USED ON THE E-28 MAGNETO IGNITION ENGINE. THE SPARK PLUG HAS THREADS ON BOTH ENDS, ONE SET OF THREADS SCREW INTO THE ENGINE AND THE OTHER SET OF THREADS ARE FOR THE RADIO SHIELDED SPARK PLUG WIRES THREAD ON TO. PRICE REDUCED FOR LARGER QUANTITIES. CALL FOR PRICING.

$1,100.00

$4.00

$3.00

SPARK PLUG WIRE SET FOR THE Y-127A MAGNETO SPECIAL TOOL FOR CONNECTING THE PURCHASE TAPE TO A SHACKLE Y-STRAINER (2" IPS) FOR E-28 FLUID SYSTEM P/N 416311-1
SPARK PLUG WIRE SET FOR THE Y-127A MAGNETOSPECIAL TOOL FOR CONNECTING THE PURCHASE TAPE TO A SHACKLEY-STRAINER (2" IPS) FOR E-28 FLUID SYSTEM P/N 416311-1
THIS ITEM CONSIST OF A SET OF 4 SPARK PLUG WIRES USED WITH THE NEWER Y127A MAGNETO. THIS SPARK PLUG WIRE SET HAS ONE END OF THE PLUG WIRES WITH THE WHITE CORE WIRES AND THE OTHER END HAVING THE ORANGE CORE WITH THE SPRINGS. WE HAVE VERY LIMITED...

THIS ITEM IS A HEAVY DUTY MACHINED STEEL SPECIAL TOOL USED TO CONNECT YOUR PURCHASE TAPE TO A SHACKLE TO ENABLE YOU TO PERFORM YOUR MONTHLY DYNO TESTS AND FULL PULLS REQUIRED. 

THIS ITEM CONSIST OF THE 2 INCH IRON PIPE SIZE (IPS) THREADED Y-STRAINER AND PLUG FOR REPLACING AN OLD OR WORN OUT Y-STRAINER.  THIS ITEM MEETS DRAWING REQUIREMENTS AND WILL PROVIDE MANY YEARS OF RELIABLE SERVICE.

$243.00

$190.00

$225.00

AVAILABLE NOW! - DONUT INSTALL TOOL - DNYO PULLER & MORE 3-PIECE WEAR PLATE SET FOR THE E-28 CLUTCH ASSEMBLY BASE SUPPORT BRACKET FOR THE PRETENSION WARNING LIGHT PIPE
AVAILABLE NOW! - DONUT INSTALL TOOL - DNYO PULLER & MORE3-PIECE WEAR PLATE SET FOR THE E-28 CLUTCH ASSEMBLYBASE SUPPORT BRACKET FOR THE PRETENSION WARNING LIGHT PIPE

NOW AVAILABLE IS ANOTHER QUALITY PRODUCT FROM RCH MANUFACTURING. ITS A MULTI-TOOL USED TO INSTALL UP TO 13 WIRE SUPPORT DONUTS. THIS TOO ALSO CAN BE USED TO DYNO TEST YOUR GEAR TO MEET THE MONTHLY REQUIREMENTS. THE TOOL CAN ALSO REMAIN ATTACHED...

THIS ITEM CONSIST OF A 3-PIECE CLUTCH ASSEMBLY WEAR PLATE SET USED TO REPLACE WORN PADS.  THIS OEM SET WILL PROVIDE YEARS OF RELIABLE SERVICE.

THIS ITEM IS THE BASE OR VERY BOTTOM BRACKET OF THE PRETENSION WARNING LIGHT ASSEMBLY THAT BOLTS TO THE FRAME OF THE FLUID STORAGE TANK.

$18,499.00

$80.00

$399.00

CHAIN GUARD SUPPORT BRACKET-UNDERSIDE 510943-1 CHAIN GUARD SUPPORT BRACKET-UNDERSIDE 510942-1 COMPLETE GASKET KIT FOR 65 HP WISCONSIN ENGINE
CHAIN GUARD SUPPORT BRACKET-UNDERSIDE 510943-1CHAIN GUARD SUPPORT BRACKET-UNDERSIDE 510942-1COMPLETE GASKET KIT FOR 65 HP WISCONSIN ENGINE

ONE OF THE TWO UNDER SIDE CHAIN GUARD SUPPORT BRACKET USED TO KEEP THE CHAIN IN PLACE DURING MAINTENANCE ACTIONS

ONE OF THE TWO UNDERSIDE CHAIN GUARD SUPPORT BRACKETS THAT PREVENT THE CHAIN FROM DROOPING AND SUPPORT THE CHAIN DURING MAINTENANCE ACTIONS

COMPLETE GASKET SEAL KIT FOR THE 65 HORSEPOWER WISCONSIN ENGINE USED ON THE E-28 ARRESTING GEAR SYSTEM.  THIS SEAL KIT INCLUDES ALL HEAD GASKETS, OIL PAN GASKET, CARBURETOR, VALVE COVER AND FUEL PUMP GASKETS.

$329.00

$329.00

$90.00

COMPLETE LABEL SET FOR THE CONSOLE PANEL PLUS WARNING LABEL COMPLETE SET OF 11 EACH LABEL PLATES FOR E-28 ARRESTING GEAR CROSS DECK PENDANT HEIGHT GAGE
COMPLETE LABEL SET FOR THE CONSOLE PANEL PLUS WARNING LABELCOMPLETE SET OF 11 EACH LABEL PLATES FOR E-28 ARRESTING GEARCROSS DECK PENDANT HEIGHT GAGE

THIS ITEM CONSIST OF 1 FULL SET OF LABELS USED ON THE E-28 CONTROL CONSOLE PLUS THE 3000 RPM WARNING LABEL USED ON TOP OF THE ENGINE CAGE.  A TOTAL OF 6 LABEL PLATES DISCOUNTED IN A BULK BUY.

THIS IS THE FULL SET OF ALL 11 EACH LABEL PLATES USED ON THE E-28 ARRESTING GEAR.  YOU GET ALL THE LABELS PICTURES.

THE GAGE USED TO VERIFY CROSS DECK PENDANT HEIGHT IS AT THE PROPER LEVEL.  THE SPECIAL TOOL IS HORSESHOE SHAPED AND EMBOSSED WITH PROPER MARKINGS.

$65.00

$135.00

$250.00

DRIVE FLANGE REPLACEMENT BEARING P/N 415803-1 E-28 CLUTCH REPLACEMENT LUBRICATION HOSE P/N 5193064 E-28 FLUID PUMP PULLEY WITH BUSHING P/N 415870-1
DRIVE FLANGE REPLACEMENT BEARING P/N 415803-1E-28 CLUTCH REPLACEMENT LUBRICATION HOSE P/N 5193064E-28 FLUID PUMP PULLEY WITH BUSHING P/N 415870-1

THIS ITEM IS A REPLACEMENT BEARING FOR THE E-28 CLUTCH DRIVE FLANGE INTERIOR. 

THIS ITEM IS AN OEM REPLACEMENT GREASE LUBRICATION HOSE FOR THE INSIDE OF THE E-28 CLUTCH ASSEMBLY HOUSING.  THIS HOSE IS NEEDED TO ALLOW PROPER LUBRICATION OF INTERNAL CLUTCH BEARING.

THIS ITEM IS A NEW PULLEY, BUSHING AND HARDWARE FOR THE E-28 FLUID PUMP ASSEMBLY.

$60.00

$19.00

$160.00

E-28 FLUID STORAGE TANK WITH LARGE OPENING AND BASE E-28 PIPING CHECK VALVE - 2 INCH THREADED BRONZE SWING CHECK E-28 TORQUE CONVERTER BEARING P/N 903010
E-28 FLUID STORAGE TANK WITH LARGE OPENING AND BASEE-28 PIPING CHECK VALVE - 2 INCH THREADED BRONZE SWING CHECKE-28 TORQUE CONVERTER BEARING P/N 903010

THIS ITEM IS THE LARGE FLUID STORAGE/COOLING TANK THAT HOLDS MOST OF THE ANTI-FREEZE USED ON THE E-28 ARRESTING GEAR. THIS TANK HAS THE RECTANGULAR OPENING AT THE TOP TO ALLOW CLEANING THE INTERIOR AND INCLUDES THE SUPPORTING FRAME AND TIE-DOWN CABLES.

THIS ITEM CONSIST OF 1 EACH 2 INCH IPS THREADED CHECK VALVE USED ON THE E-28 ARRESTING GEAR ON THE INLET PIPING SIDE TO PREVENT FLUID GOING BACK AGAINST THE FLUID PUMP ASSEMBLY. THE VALVE IS MADE OF BRONZE AND IS RATED AS PER DRAWING REQUIREMENTS.

THIS ITEM IS ONE OF THE E-28 TORQUE CONVERTER BEARINGS YOU WOULD NORMALLY REPLACE DURING A TORQUE CONVERTER OVERHAUL

$0.00

$135.00

$32.50

E-28 TORQUE CONVERTER BEARING P/N 9417499 FUEL HOSE BETWEEN FUEL PUMP AND CARBURETOR P/N RM-1049-K IGNITION SWITCH LABEL PLATE
E-28 TORQUE CONVERTER BEARING P/N 9417499FUEL HOSE BETWEEN FUEL PUMP AND CARBURETOR P/N RM-1049-KIGNITION SWITCH LABEL PLATE

THIS ITEM IS ONE OF THE TORQUE CONVERTER BEARINGS YOU WOULD NORMALLY CHANGE OUT DURING A TORQUE CONVERTER OVERHAUL

THIS ITEM IS AN OEM REPLACEMENT FUEL HOSE THAT IS LOCATED BETWEEN THE WISCONSIN ENGINE FUEL PUMP AND THE CARBURETOR. THE HOSE IS 13 INCHES LONG.

THIS ITEM CONSIST OF 1 EACH E-28 IGNITION SWITCH LABEL PLATE.  THE LABEL IS MADE OF HIGH IMPACT GRADE PLASTIC EMBOSSED WITH ALL PROPER MARKINGS.  THIS IS QUALITY LABEL PLATE AND NOT THE OEM ALUMINUM PLATE THAT IS EASILY BENT.

$21.99

$24.00

$12.00

LED E-28 PRETENSION WARNING LIGHT SYSTEM MUFFLER FOR THE 65 HP WISCONSIN ENGINE ONE PIECE E-28 CLUTCH WEAR PLATE
LED E-28 PRETENSION WARNING LIGHT SYSTEMMUFFLER FOR THE 65 HP WISCONSIN ENGINEONE PIECE E-28 CLUTCH WEAR PLATE

A LED REPLACEMENT PRE-TENSION WARNING LIGHT SYSTEM CURRENTLY USED ON E-28 ARRESTING GEAR SYSTEMS.

 

THIS ITEM IS AN OEM REPLACEMENT MUFFLER FOR THE 65 HORSEPOWER WISCONSIN ENGINE USED ON THE E-28 ARRESTING GEAR SYSTEM

THIS ITEM CONSIST OF 1 EACH E-28 ONE-PIECE CLUTCH WEAR PLATE. AS THE PHOTO SHOWS, THIS WEAR PLATE IS NOT THE 3-PIECE NORMALLY PURCHASED. MANY MAINTENANCE PERSONNEL LOVE THE SOLID ONE-PIECE WEAR PLATES BECAUSE THEY CANNOT FALL OUT IF THE DRIVE...

$2,850.00

$86.00

$88.00

PIPE FOR PRETENSION WARNING LIGHT REPLACEMENT E-28 CLUTCH BEARING P/N 907540 REPLACEMENT PLEXIGLASS FOR DONALDSON AIR BREATHER UNIT
PIPE FOR PRETENSION WARNING LIGHTREPLACEMENT E-28 CLUTCH BEARING P/N 907540REPLACEMENT PLEXIGLASS FOR DONALDSON AIR BREATHER UNIT

THIS ITEM IS THE PIPE OR TUBE USED TO SUPPORT THE PRETENSION WARNING LIGHT AND BRACKETS.  THIS ITEM IS ONLY THE PIPE.  CALL FOR GROUP PRICING IF YOU NEED LOWER AND BOTH UPPER BRACKETS.

THIS ITEM IS AN OEM REPLACEMENT BEARING FOR THE E-28 CLUTCH ASSEMBLY P/N 907540

THIS ITEM CONSIST OF THE CLEAR PLEXIGLASS PART USED ON THE DONALDSON AIR BREATHER UNIT USED ON THE 65 HP WISCONSIN ENGINES.

$169.00

$36.00

$19.00

SPECIAL TOOL-TAPE DRUM PIN PULLER. TORQUE CONVERTER SUPPORT BRACKET ASSEMBLY CHAIN GUARD
SPECIAL TOOL-TAPE DRUM PIN PULLER.TORQUE CONVERTER SUPPORT BRACKET ASSEMBLY CHAIN GUARD

THIS ITEM IS A SPECIAL TOOL USED TO TAKE OUT A HARD TO REMOVE TAPE DRUM PIN. A SLIDE HAMMER HAS BEEN INSTALLED TO REMOVE A PIN THAT IS FROZE IN PLACE.

THIS ITEM CONSIST OF MULTIPLE PARTS MAKING UP THE TORQUE CONVERTER SUPPORT BRACKET ASSEMBLY. THIS INCLUDES THE CURVED BRACKET THAT BOLTS DIRECTLY TO THE TORQUE CONVERTER, THE ANGLE IRON BRACKET THAT MOUNTS TO THE ENGINE SUPPORT BASE OR SLED AND...

THE CHAIN GUARD IS MADE TO CURRENT DRAWINGS FROM HEAVY GAUGE STEEL AND IS SANDBLASTED, PRIMED AND PAINTED WITH QUALITY EPOXY PAINT.  CALL FOR CURRENT PRICING.

$240.00

$285.00

$0.00

This item ships freight.

CLUTCH ENGAGED TORQUE CONVERTER COVER SAFETY LABEL PLATE 90 DEGREE STREET ELBOW AND THE BREATHER CAP A #36 ZENITH CARBURETOR MAIN JET.
CLUTCH ENGAGED TORQUE CONVERTER COVER SAFETY LABEL PLATE90 DEGREE STREET ELBOW AND THE BREATHER CAPA #36 ZENITH CARBURETOR MAIN JET.

CLUTCH ENGAGED - CRITICAL SAFETY LABEL PLATE MOUNTED TO THE LID OF THE TORQUE CONVERTER AND SPEED REDUCER COVER INDICATING THE POSITION OF THE CLUTCH LEVER.

THIS ITEM CONSIST OF A 90 DEGREE STREET ELBOW, A REDUCER BUSHING AND THE BREATHER CAP. THE SPEED REDUCER NEEDS THE BREATHER TO PREVENT BLOWN SEALS FROM THE INTERNAL PRESSURE BUILT UP DURING OPERATIONS OF THE SPEED REDUCER.

A #36 ZENITH CARBURETOR MAIN JET. THE #36 JET REPLACES #42 JETS, WHICH CAUSE PREMATURE FOULING OF THE SPARK PLUGS. (OEM)

$14.00

$33.00

$16.50

A COMPLETE MANN-HUMMEL FILTER UNIT CONVERSION KIT A SET OF FOUR (4) SPACERS USED UNDER THE SPEED REDUCER A SET OF HEAVY DUTY BATTERY CABLES
A COMPLETE MANN-HUMMEL FILTER UNIT CONVERSION KITA SET OF FOUR (4) SPACERS USED UNDER THE SPEED REDUCERA SET OF HEAVY DUTY BATTERY CABLES

A COMPLETE MANN-HUMMEL FILTER UNIT CONVERSION KIT, MANUFACTURED TO REPLACE THE VERY LONG DONALDSON FILTER UNITS. THE MANN-HUMMEL FILTER ASSEMBLY HAS A SHORTER 

A SET OF FOUR (4) SPACERS USED UNDER THE SPEED REDUCER TO RAISE IT TO THE SAME LEVEL AS THE TORQUE CONVERTER. THE SPACERS ARE NECESSARY TO PREVENT PREMATURE FAILURE OF THE UNIVERSAL JOINT.

 MADE FROM NAVAIR SPECIFICATIONS. ONE NEGATIVE AND ONE POSITIVE.

$429.00

$52.00

$62.00

ALTERNATOR FOR THE E-28 WISCONSIN ENGINE. AMMETER FOR THE E-28 CONSOLE. BRUSH AND SPRING FOR MAGNETO IGNITION MOTOR.
ALTERNATOR FOR THE E-28 WISCONSIN ENGINE.AMMETER FOR THE E-28 CONSOLE.BRUSH AND SPRING FOR MAGNETO IGNITION MOTOR.

ALTERNATOR FOR THE E-28 WISCONSIN ENGINE.

AMMETER FOR THE E-28 CONSOLE.

CARBON BRUSH AND SPRING FOR MAGNETO WISCONSIN IGNITION ENGINE.

$300.00

$38.00

$9.00

CARBURETOR ASSY. FOR 65 HP WISCONSIN MOTOR. CHOKE AND THROTTLE CABLE ASSEMBLY. ONE COMPLETE SET. COIL BOOT
CARBURETOR ASSY. FOR 65 HP WISCONSIN MOTOR.CHOKE AND THROTTLE CABLE ASSEMBLY. ONE COMPLETE SET.COIL BOOT

CARBURETOR ASSEMBLY FOR 65 HP WISCONSIN MOTOR WITH ELECTRONIC IGNITION AND INCLUDES THE ANTI-DIESELING SOLENOID.

1 EACH CHOKE CABLE ASSEMBLY AND 1 EACH THROTTLE CABLE ASSEMBLY EQUALS ONE COMPLETE SET.

COIL BOOT USED TO PROTECT THE COIL FROM WATER INSTRUSION AND SHOCK HAZARD TO PERSONNEL

$485.90

$121.40

$3.00

COIL FOR MAGNETO IGNITION MOTOR. COMPLETELY REBUILT E-28 CLUTCH ASSEMBLY AND TORQUE CONVERTER CONDENSER
COIL FOR MAGNETO IGNITION MOTOR.COMPLETELY REBUILT E-28 CLUTCH ASSEMBLY AND TORQUE CONVERTERCONDENSER

COIL FOR THE OLDER MAGNETO IGNITION WISCONSIN ENGINE.

A RE-BUILDABLE CLUTCH ASSEMBLY AND TORQUE CONVERTER CORE IS REQUIRED AS A TURN IN

CONDENSER USED ON THE END CAP OF THE MAGNETO FOR WISCONSIN ENGINES

$149.00

$3,450.00

This item ships freight.

$78.00

CRITICAL SAFETY LABEL PLATE MOUNTED TO THE SPROCKET ASSEMBLY CRITICAL SAFETY LABEL PLATE MOUNTED TO THE SPROCKET ASSEMBLY DISTRIBUTOR FOR THE E-28 WISCONSIN ENGINE.
CRITICAL SAFETY LABEL PLATE MOUNTED TO THE SPROCKET ASSEMBLYCRITICAL SAFETY LABEL PLATE MOUNTED TO THE SPROCKET ASSEMBLYDISTRIBUTOR FOR THE E-28 WISCONSIN ENGINE.

CRITICAL SAFETY LABEL PLATE MOUNTED TO THE SPROCKET ASSEMBLY GIVING CLEAR VISUAL INDICATION AS TO THE STATUS OF THE CAM LEVER.  THE LABEL PLATE IS MARKED "DISARMED".

CRITICAL SAFETY LABEL PLATE MOUNTED TO THE SPROCKET ASSEMBLY GIVING CLEAR VISUAL INDICATION AS TO THE STATUS OF THE CAM LEVER AS "ARMED".

DISTRIBUTOR FOR THE E-28 65 HP WISCONSIN ENGINE WITH ELECTRONIC IGNITION.

$12.00

$12.00

$375.50

E-28 ABSORBER PACKING GLAND NUT MONSTER WRENCH E-28 ALTERNATOR TENSIONING BRACKET E-28 CONTROL BOX AND LID ONLY.
E-28 ABSORBER PACKING GLAND NUT MONSTER WRENCHE-28 ALTERNATOR TENSIONING BRACKETE-28 CONTROL BOX AND LID ONLY.

E-28 ABSORBER PACKING GLAND NUT MONSTER WRENCH. REPLACES THE NAWC OPEN END WRENCH (P/N 514010-1).  THIS HEAVY DUTY WRENCH IS HEAVY AND TYPICALLY NEEDS AT LEAST TWO PERSONNEL TO OPERATE.

E-28 ALTERNATOR TENSIONING BRACKET USED WITH THE 65 HORSEPOWER ENGINE.

E-28 CONTROL BOX AND LID ONLY.  WE HAVE ANOTHER PRODUCT LISTED WITH GAGES AND ANOTHER WITH ALL THE GAGES AND WIRING HARNESS.  THIS ITEM DOES NOT INCLUDE THE GAGES OR WIRING.  PLEASE CALL FOR CURRENT PRICING.

$920.00

This item ships freight.

$44.00

$0.00

This item ships freight.

E-28 CONTROL BOX WITH CABLES AND GAGES. E-28 CONTROL BOX WITH CABLES, GAGES AND WIRING HARNESS E-28 COVER ASSEMBLY FOR THE TORQUE CONVERTER/CLUTCH ASSEMBLY
E-28 CONTROL BOX WITH CABLES AND GAGES.E-28 CONTROL BOX WITH CABLES, GAGES AND WIRING HARNESSE-28 COVER ASSEMBLY FOR THE TORQUE CONVERTER/CLUTCH ASSEMBLY

E-28 CONTROL BOX WITH THROTTLE CABLE, CHOKE CABLE AND ALL GAGES.  PLEASE CALL FOR CURRENT PRICING.

E-28 CONTROL BOX WITH CABLES, GAGES AND WIRING HARNESS READY FOR INSTALLATION.  PLEASE CALL FOR CURRENT PRICING.

E-28 COVER ASSEMBLY FOR THE TORQUE CONVERTER/CLUTCH ASSEMBLY, PRIMED 7 PAINTED WITH NEW LABELS.  PLEASE CALL FOR CURRENT PRICING.

$0.00

This item ships freight.

$0.00

This item ships freight.

$0.00

This item ships freight.

E-28 ENERGY ABSORBER INLET PIPE SUPPORT BRACKET WITH U-BOLT. E-28 ENGINE CAGE OR COVER ASSEMBLY
E-28 ENERGY ABSORBER INLET PIPE SUPPORT BRACKET WITH U-BOLT.E-28 ENGINE CAGE OR COVER ASSEMBLYE-28 PRESSURE ARM ROLLER ARM WELDMENT

SET OF 2 E-28 ENERGY ABSORBER INLET PIPE SUPPORT BRACKETS WITH U-BOLTS.

E-28 ENGINE CAGE OR COVER ASSEMBLY FOR THE NEW WISCONSIN MOTOR

E-28 PRESSURE ARM ROLLER ARM WELDMENT. THE ARM IS MANUFACTURED TO SPECIFICATION, SAND-BLASTED,PRIMER AND PAINTED.

$92.00

$0.00

This item ships freight.

$2,850.00

This item ships freight.

E-28 PRESSURE ARM ROLLER ASSEMBLY PIVOT BRACKET ASSEMBLY E-28 PRETENSION WARNING SYSTEM LINIT SWITCH WIRING HARNESS E-28 PRETENSTION WARNING LIGHT BULB/L.E.D.
E-28 PRESSURE ARM ROLLER ASSEMBLY PIVOT BRACKET ASSEMBLYE-28 PRETENSION WARNING SYSTEM LINIT SWITCH WIRING HARNESSE-28 PRETENSTION WARNING LIGHT BULB/L.E.D.

E-28 PRESSURE ARM ROLLER ASSEMBLY PIVOT BRACKET ASSEMBLY, INCLUDING THE PIVOT PIN, WASHERS AND COTTER PINS.  THE PIVOT IS MADE TO SPECIFICATIONS, SAND-BLASTED, PRIMER AND PAINTED.

E-28 PRETENSION WARNING SYSTEM LINIT SWITCH WIRING HARNESS WITH MOLDED HEAVY DUTY CABLE PLUG CONNECTORS.

E-28 LED PRETENSTION WARNING LIGHT BULB WHICH OPERATES OFF OF 12 VOLTS DC (BULB ONLY)

$1,650.00

$105.00

$1,950.00

E-28 TENSIONING WINCH FOR THE PRESSURE ARM ROLLER ASSEMBLY E-28 TORQUE CONVERTER BEARING KIT OF 4 BEARINGS
E-28 SPROCKET LARGE ROLLER BEARING P/N 415852-1E-28 TENSIONING WINCH FOR THE PRESSURE ARM ROLLER ASSEMBLYE-28 TORQUE CONVERTER BEARING KIT OF 4 BEARINGS

THIS ITEM IS THE LARGE E-28 ROLLER BEARING USED WITH THE SPROCKET ASSEMBLY.

E-28 TENSIONING WINCH FOR THE PRESSURE ARM ROLLER ASSEMBLY. MADE WITH A FRICTION BRAKE 

E-28 TORQUE CONVERTER BEARING KIT CONSISTING OF 4 DIFFERENT BEARINGS.  BEARINGS INCLUDED ARE PART NUMBERS 903010, 9417499, 9420046 AND 907050.  SAVE BY BUYING ALL 4 AS A KIT

$318.50

$149.50

$480.00

E-28 TORQUE CONVERTER BEARING P/N 9420046 E-28 TORQUE CONVERTER BEARING E-28 TORQUE CONVERTER OVERHAUL SEAL KIT.
E-28 TORQUE CONVERTER BEARING P/N 9420046E-28 TORQUE CONVERTER BEARINGE-28 TORQUE CONVERTER OVERHAUL SEAL KIT.

E-28 TORQUE CONVERTER BEARING P/N 9420046

E-28 TORQUE CONVERTER BEARING P/N 907050

E-28 TORQUE CONVERTER OVERHAUL SEAL KIT.

$210.00

$82.00

$228.40

ENGINE COVER CRITICAL SAFETY LABEL FUEL BOWL (OEM) FOR E-28 WISCONSIN MOTOR FUEL LINE COVER PLATE
ENGINE COVER CRITICAL SAFETY LABELFUEL BOWL (OEM) FOR E-28 WISCONSIN MOTORFUEL LINE COVER PLATE

CRITICAL SAFETY LABEL PLATE MOUNTED TO THE LID OF THE ENGINE COVER INDICATING THE IMPORTANCE OF KEEPING THE ENGINE FROM OVER-REVING OR DAMAGE AND POSSIBLE INJURY TO PERSONNEL OR EQUIPMENT.

FUEL BOWL (OEM) FOR E-28 WISCONSIN MOTOR

FUEL LINE COVER PLATE USED TO PROTECT THE FUEL LINE AND GROUND WIRE FROM THE GAS TANK TO THE ENGINE FRAME

$16.00

$24.00

$120.00

This item ships freight.

FUEL PUMP FOR 65 HP WISCONSIN MOTOR. HOUR METER FOR THE E-28 CONSOLE. RELEASE POST LABEL PLATE AS TO THE LOCATION OF THE CAM
FUEL PUMP FOR 65 HP WISCONSIN MOTOR.HOUR METER FOR THE E-28 CONSOLE.RELEASE POST LABEL PLATE AS TO THE LOCATION OF THE CAM

FUEL PUMP FOR 65 HP WISCONSIN MOTOR.

HOUR METER FOR THE E-28 CONSOLE.

IMPORTANT LABEL PLATE USED TO PROVIDE VISUAL REFERENCE AS TO THE LOCATION OF THE CAM RELEASE POST AS THE POST IS LOCATION OUT OF VIEW UNDER THE SPROKET ASSEMBLY.

$124.50

$34.00

$14.00

HOUR METER INSTRUMENT PANEL IDENTIFICATION PLATE ENGINE RPM INSTRUMENT PANEL IDENTIFICATION PLATE OIL PRESSURE AND AMMETER INSTRUMENT PANEL IDENTIFICATION PLATE
HOUR METER INSTRUMENT PANEL IDENTIFICATION PLATEENGINE RPM INSTRUMENT PANEL IDENTIFICATION PLATEOIL PRESSURE AND AMMETER INSTRUMENT PANEL IDENTIFICATION PLATE

HOUR METER IDENTIFICATION PLATE LOCATED ON THE  TO IDENTIFY THE PURPOSE OF THE INSTRUMENT GAGES.

 ENGINE RPM LABEL PLATE LOCATED ON THE INSTRUMENT PANEL TO IDENTIFY THE PURPOSE OF THE INSTRUMENT GAGES.

OIL PRESSURE AND AMMETER IDENTIFICATION PLATE LOCATED ON THE INSTRUMENT PANEL TO IDENTIFY THE PURPOSE OF THE INSTRUMENT GAGES.

$14.00

$14.00

$14.00

CHOKE - STARTER - THROTTLE INSTRUMENT PANEL LABEL PLATE LOWER BATTERY PLATE LOWER BRACKET TO SUPPORT THE E-28 PRETENSION WARNING LIGHT
CHOKE - STARTER - THROTTLE INSTRUMENT PANEL LABEL PLATELOWER BATTERY PLATELOWER BRACKET TO SUPPORT THE E-28 PRETENSION WARNING LIGHT

CHOKE - STARTER - THROTTLE IDENTIFICATION LOCATED ON THE INSTRUMENT PANEL TO IDENTIFY THE PURPOSE OF BOTH OF THE .

 USED TO SUPPORT THE BATTERY AND IS MADE OF HEAVY GAUGE STEEL, PRIMED AND PAINTED.

LOWER BRACKET TO SUPPORT THE E-28 PRETENSION WARNING LIGHT ASSEMBLY, PRIMER AND PAINTED. 

$14.00

$237.00

$239.00

MANN-HUMMEL FILTER INNER SAFETY REPLACEMENT ELEMENT. (OEM) MANN-HUMMEL FILTER OUTER SAFETY REPLACEMENT ELEMENT. (OEM) OEM REPLACEMENT ANTI-DIESELING SOLENOID
MANN-HUMMEL FILTER INNER SAFETY REPLACEMENT ELEMENT. (OEM)MANN-HUMMEL FILTER OUTER SAFETY REPLACEMENT ELEMENT. (OEM)OEM REPLACEMENT ANTI-DIESELING SOLENOID

MANN-HUMMEL FILTER INNER SAFETY REPLACEMENT ELEMENT. (OEM)

MANN-HUMMEL FILTER OUTER SAFETY REPLACEMENT ELEMENT. (OEM)

OEM REPLACEMENT ANTI-DIESELING SOLENOID FOR THE WISCONSIN ELECTRONIC IGNITION CARBURETOR.

$40.00

$50.00

$84.10

OIL FILTER FOR THE 65 HP WISCONSIN MOTOR. OIL LINE HOSE OIL PRESSURE GAGE FOR THE E-28 CONSOLE
OIL FILTER FOR THE 65 HP WISCONSIN MOTOR.OIL LINE HOSE OIL PRESSURE GAGE FOR THE E-28 CONSOLE

OIL FILTER FOR THE 65 HP WISCONSIN MOTOR.

OIL LINE HOSE THAT CONNECTS AT A FITTING BEHIND THE ENGINE STARTER AND GOES TO THE OIL PRESSURE GAGE.  THE HOSE MEASURES 54 1/2 INCHES.

OIL PRESSURE GAGE FOR THE E-28 CONSOLE

$8.50

$28.50

$75.00

POINTS SET FOR MAGNETO IGNITION MOTOR 1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY 1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY
POINTS SET FOR MAGNETO IGNITION MOTOR1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY

POINTS SET FOR MAGNETO IGNITION MOTOR

1 OF THE 4 PROTECTIVE DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY, PRIMED AND PAINTED.  PLEASE CALL FOR CURRENT PRICING.

1 OF THE 4 PROTECTIVE DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY, PRIMED AND PAINTED.  THIS IS THE DECKPLATE THAT IS INSTALLED CLOSEST TO THE PRESSURE ARM PIVOT BASE. CALL FOR CURRENT PRICING.

$42.00

$0.00

This item ships freight.

$0.00

This item ships freight.

1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY 1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY RCH PORTABLE FLUID EVACUATOR
1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY1 OF 4 DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLYRCH PORTABLE FLUID EVACUATOR

1 OF THE 4 PROTECTIVE DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY, PRIMED AND PAINTED.  PLEASE CALL FOR CURRENT PRICING.

THIS ITEM CONSIST OF ONE OF THE PROTECTIVE DECKPLATES THAT CIRCLE THE E-28 TAPE DRUM ASSEMBLY, PRIMED AND PAINTED. CALL FOR CURRENT PRICING.

RCH PORTABLE FLUID EVACUATOR. WILL HOLD 2.3 GALLONS OF FLUID. 

$0.00

This item ships freight.

$0.00

This item ships freight.

$149.50

REBUILT MAGNETO FOR THE 65 HP WISCONSIN ENGINE REPLACEMENT CARBURATOR TO GOVERNOR LINK ROD AND LOCKING CLIP REPLACEMENT FUEL SENDING UNIT AND GAGE  (OEM)
REBUILT MAGNETO FOR THE 65 HP WISCONSIN ENGINEREPLACEMENT CARBURATOR TO GOVERNOR LINK ROD AND LOCKING CLIPREPLACEMENT FUEL SENDING UNIT AND GAGE (OEM)

REBUILT MAGNETO FOR THE 65 HP WISCONSIN ENGINE. (WITH EXCHANGE OF REBUILDABLE CORE)

REPLACEMENT CARBURATOR TO GOVERNOR LINK ROD AND LOCKING CLIP. (OEM)

REPLACEMENT FUEL GAGE SENDING UNIT ASSEMBLY FOR THE E-28 FUEL TANK. (OEM)

$495.00

$9.00

$114.20

OEM REPLACEMENT FUEL GAGE FRO THE E-28 GASOLINE TANK. REPLACEMENT FUEL TANK WITH FUEL GAGE. ALL ALUMINUM ROTOR FOR MAGNETO IGNITION MOTOR.
REPLACEMENT FUEL TANK GAGEREPLACEMENT FUEL TANK WITH FUEL GAGE. ALL ALUMINUM ROTOR FOR MAGNETO IGNITION MOTOR.

 AN OEM FUEL TANK GAGE FOR OLD AND NEWER FUEL TANKS USED ON THE E-28 ARRESTING GEAR SYSTEM

REPLACEMENT FUEL TANK WITH FUEL GAGE. ALL ALUMINUM

ROTOR FOR MAGNETO IGNITION MOTOR.

$21.50

$995.00

This item ships freight.

$20.00

RUNWAY EDGE SHEAVE DECKPLATE SET OF SPARK PLUG WIRES 65 HP WISCONSIN MOTOR.
RUNWAY EDGE SHEAVE DECKPLATESET OF SPARK PLUG WIRES 65 HP WISCONSIN MOTOR.SOLAR POWER BATTERY TRICKEL CHARGER FOR 12 VOLT DC BATTERY

THE RUNWAY EDGE SHEAVE DECKPLATE IS MADE TO CURRENT DRAWING SPECIFICATION AND IS SANDBLASTED, PRIMED AND PAINTED WITH QUALITY EPOXY PAINT.  PLEASE CALL FOR CURRENT PRICING.

SET OF SPARK PLUG WIRES 65 HP WISCONSIN MOTOR.

SOLAR POWER BATTERY TRICKEL CHARGER FOR 12 VOLT DC BATTERY.THIS KIT INCLUDES A 12 WATT SOLAR PANEL, A BATTERY CONDITION INDICATOR, A QUICK CONNECT KIT AND MOUNTING HARDWARE.

$0.00

This item ships freight.

$54.00

$175.50

SOLAR POWER BATTERY TRICKEL CHARGER FOR 12 VOLT DC BATTERY SET OF 4 SPARK PLUGS FOR 65 HP ELECTRONIC IGNITION ENGINE
SOLAR POWER BATTERY TRICKEL CHARGER FOR 12 VOLT DC BATTERYSET OF 4 SPARK PLUGS FOR 65 HP ELECTRONIC IGNITION ENGINESPROCKET ADAPTER ALIGNMENT TOOLS

SOLAR POWER BATTERY TRICKEL CHARGER FOR 12 VOLT DC BATTERY.THIS KIT INCLUDES A 15 WATT SOLAR PANEL, A BATTERY CONDITION INDICATOR, A QUICK CONNECT KIT AND MOUNTING HARDWARE.

SPARK PLUGS FOR 65 HP WISCONSIN ENGINE WITH ELECTRONIC IGNITION.  CALL FOR PRICING ON LARGER QUANTITIES.

ALIGNMENT SPECIAL  USED DURING THE INSTALLATION OF THE SPROCKET ADAPTER TO MAINTAIN ALIGNMENT OF THE ADAPTER TO THE TOP OF THE SHAFT.

$175.50

$10.00

$72.00

SPROCKET ASSEMBLY BEARING COVER STARTER IGNITION SWITCH FOR THE E-28 CONSOLE. TACHOMETER FOR THE E-28 CONSOLE.
SPROCKET ASSEMBLY BEARING COVERSTARTER IGNITION SWITCH FOR THE E-28 CONSOLE.TACHOMETER FOR THE E-28 CONSOLE.

THE SPROCKET ASSEMBLY BEARING COVER WITH LIFTING EYE IS INSTALLED AFTER THE BEARING RETAINED PLATE HAS BEEN INSTALLED AND ALL BOLTS ARE TORQUE AND SAFETY WIRED.

STARTER IGNITION SWITCH FOR THE E-28 CONSOLE.

TACHOMETER FOR THE E-28 CONSOLE.

$660.00

$36.00

$180.00

CLUTCH DISENGAGED TORQUE CONVERTER COVER SAFETY LABEL PLATE UPPER AND LOWER PRETENSION WARNING LIGHT ASSEMBLY BRACKETS UPPER BRACKET TO SUPPORT THE E-28 PRETENSION WARNING LIGHT
CLUTCH DISENGAGED TORQUE CONVERTER COVER SAFETY LABEL PLATEUPPER AND LOWER PRETENSION WARNING LIGHT ASSEMBLY BRACKETSUPPER BRACKET TO SUPPORT THE E-28 PRETENSION WARNING LIGHT

CLUTCH DISENGAGED - CRITICAL SAFETY LABEL PLATE MOUNTED TO THE LID OF THE TORQUE CONVERTER AND SPEED REDUCER COVER INDICATING THE POSITION OF THE CLUTCH LEVER. 

A SET OF UPPER AND LOWER PRETENSION WARNING LIGHT ASSEMBLY BRACKETS, PRIMED AND PAINTED. SAVE MONEY BY PURCHASING AS A SET WHICH CONSIST OF THE UPPER AND LOWER LIGHT BRACKETS, BOLTED TOGETHER WITH STAINLESS STEEL FASTENERS.

UPPER BRACKET TO SUPPORT THE E-28 PRETENSION WARNING LIGHT ASSEMBLY, PRIMED AND PAINTED.

$14.00

$375.00

$219.00

WISCONSIN ENGINE OIL PAN GASKET
WISCONSIN ENGINE OIL PAN GASKET

WISCONSIN ENGINE OIL PAN GASKET FOR V465D 65 HORSE POWER

$16.00